MÄDLERMÄDLER· Sprockets, Chains, Accessories
Chain tensioner SPANN-BOY® TS 10 B-2 stainless steel
Manufacturer part no. 14040926
$221.35≈ 192.23 €
On backorderlead time 14 d
Estimated landed cost
| Item | €192.23 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €41.45 |
| Total delivered | €248.68 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 500 g |
Other characteristics
| Distance to middle of chain sliding surface for | 11.3 mm |
| Number of strands | 2 |
| Total width of sliding element | 32 mm |
| Din iso no | 10 B-2 |
| Material | Plastic (PE-UHMW) / Stainless steel |
| Pitch | 5/8 x 3/8″ |
| Surface | Blank |
| Tensioning force | 33-190 N |
Description
Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW. These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives. • Needed space below chain only 40mm. • With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces. • Usable travel about 40mm. • Interchangeable with similar parts of other suppliers. Temperature range: -20°C to +60°C (short time up to +80°C).
Similar products
MÄDLERIn stock
Plastic guide rail 60 x 20 x 2000mm for roller chain 12 B-3
€74.34$85.60
View at seller ↗MÄDLERIn stock
Plastic guide rail 60 x 15 x 2000mm for roller chain 12 B-3
€65.97$75.96
View at seller ↗MÄDLERIn stock
Plastic guide rail 55 x 20 x 2000mm for roller chain 10 B-3
€68.74$79.15
View at seller ↗MÄDLERIn stock
Plastic guide rail 55 x 15 x 2000mm for roller chain 10 B-3
€67.00$77.15
View at seller ↗