MÄDLERMÄDLER· Timing Belts and Pulleys
Timing belt pulley T5 material polyacetal resin 13 teeth for belt width 10mm
Manufacturer part no. 16251300
$6.39≈ 5.55 €
On backorderlead time 14 d
Estimated landed cost
| Item | €5.55 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €4.11 |
| Total delivered | €24.66 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 7.2 g |
Other characteristics
| Belt width | 10 mm |
| Hub diameter | 15 mm |
| Hub length | 8 mm |
| No of teeth | 13 |
| Outer diameter of flanges | 22.25 mm |
| Outer diameter of pulley | 19.85 mm |
| Pilot hole | 5 mm |
| Pitch circle diameter | 20.69 mm |
| Thickness of flanges | 1.25 mm |
| Tooth width | 11.5 mm |
| Total length | 22 mm |
| Material | Plastic die-cast (Polyacetal, up to 80°C) |
| Profile | T5 |
| Surface |
Description
Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality.
Similar products
MÄDLERIn stock
Neoprene timing belt 1400 H 280 teeth belt width 200=50.8mm
€210.46$242.34
View at seller ↗MÄDLERIn stock
Neoprene timing belt 1250 H 250 teeth belt width 200=50.8mm
€175.38$201.95
View at seller ↗MÄDLERIn stock
Neoprene timing belt 1000 H 200 teeth belt width 200=50.8mm
€144.47$166.36
View at seller ↗