MÄDLERMÄDLER· Spur Gears, Toothed Racks, Internal Gears, Ratchet Wheels
Spur gear made of polyacetal resin die-cast with hub module 0.5 45 teeth tooth width 3mm outside diameter 23.5mm
Manufacturer part no. 28104500
$1.77≈ 1.54 €
In stock — 10 unitslead time 14 d
Estimated landed cost
| Item | €1.54 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €3.31 |
| Total delivered | €19.85 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 2.33 g |
Other characteristics
| Bore bh9 mm | 4 mm |
| Hub diameter | 12.15 mm |
| Max torque | 12.5 Ncm |
| Module | 0.5 |
| No of teeth | 45 |
| Outer diameter | 23.5 mm |
| Pitch circle diameter | 22.5 mm |
| Tooth width | 3 mm |
| Material | Plastic die-cast (Polyacetal, up to 80°C) |
| Surface | Blank |
Description
Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality.
Similar products
MÄDLERIn stock
Spur gear made of polyketone die-cast with hub module 0.5 70 teeth tooth width 3mm outside diameter 36mm
€2.56$2.95
View at seller ↗MÄDLERIn stock
Spur gear made of polyketone die-cast with hub module 0.5 65 teeth tooth width 3mm outside diameter 33,5mm
€2.54$2.92
View at seller ↗MÄDLERIn stock
Spur gear made of polyacetal resin die-cast with hub module 0.5 65 teeth tooth width 3mm outside diameter 33.5mm
€2.09$2.41
View at seller ↗MÄDLERIn stock
Spur gear made of polyketone die-cast with hub module 0.5 64 teeth tooth width 3mm outside diameter 33mm
€2.42$2.79
View at seller ↗