MÄDLERMÄDLER· Locking Assemblies, Clamping Bushes, Taper Bushes
Locking assembly SIG stainless steel 1.4301 bore 19mm
Manufacturer part no. 61511900
$66.19≈ 57.48 €
In stock — 30 unitslead time 14 d
Estimated landed cost
| Item | €57.48 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €14.50 |
| Total delivered | €86.98 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 46.9 g |
Other characteristics
| Inner diameter | 19 mm |
| Length | 28 mm |
| Outer diameter | 25 mm |
| Tightening torque fastening screws | 30 Nm |
| Transmissible torque | 29 Nm |
| Design shape | Cylindrical with central nut |
| Material | Stainless steel (304) |
| Self centering | Yes |
| Surface | Blank |
| Thread size | M 22×1 mm |
| Type | SIG |
Description
Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA.
