MÄDLERMÄDLER· Locking Assemblies, Clamping Bushes, Taper Bushes
Locking assembly SSGK bore 35mm size 35x45x21.5mm
Manufacturer part no. 61520135
$30.75≈ 26.70 €
In stock — 2 unitslead time 14 d
Estimated landed cost
| Item | €26.70 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €8.34 |
| Total delivered | €50.04 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 170 g |
Other characteristics
| Admissible axial force | 13 kN |
| Inner diameter | 35 mm |
| Length | 21.5 mm |
| Outer diameter | 45 mm |
| Tightening torque fastening screws | 480 Nm |
| Transmissible torque | 225 Nm |
| Design shape | Cylindrical with central nut |
| Hub surface pressure | 118 N/mm2 |
| Material | Steel |
| Self centering | No |
| Shaft surface pressure | 150 N/mm2 |
| Slotted nut 8 8 thread size | M 40×1.5 |
| Surface | Blank |
Description
Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Very short version. Also suitable for small hub diameters. Not self-centering. Not self-locking. Axial movement during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.
