MÄDLERMÄDLER· Locking Assemblies, Clamping Bushes, Taper Bushes
Locking assembly SSGK bore 55mm size 55x68x27.5mm
Manufacturer part no. 61520155
$49.25≈ 42.77 €
In stock — 2 unitslead time 14 d
Estimated landed cost
| Item | €42.77 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €11.55 |
| Total delivered | €69.32 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 350 g |
Other characteristics
| Admissible axial force | 22 kN |
| Inner diameter | 55 mm |
| Length | 27.5 mm |
| Outer diameter | 68 mm |
| Tightening torque fastening screws | 1 100 Nm |
| Transmissible torque | 580 Nm |
| Design shape | Cylindrical with central nut |
| Hub surface pressure | 80 N/mm2 |
| Material | Steel |
| Self centering | No |
| Shaft surface pressure | 98 N/mm2 |
| Slotted nut 8 8 thread size | M 60×2 |
| Surface | Blank |
Description
Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Very short version. Also suitable for small hub diameters. Not self-centering. Not self-locking. Axial movement during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.
