MÄDLERMÄDLER· Locking Assemblies, Clamping Bushes, Taper Bushes
Locking assembly BAR bore 6mm
Manufacturer part no. 61540600
$29.60≈ 25.71 €
In stock — 50 unitslead time 14 d
Estimated landed cost
| Item | €25.71 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €8.14 |
| Total delivered | €48.85 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 12 g |
Other characteristics
| Admissible axial force | 3 kN |
| Inner diameter | 6 mm |
| Length | 11 mm |
| No of bolts pcs | 3 |
| Outer diameter | 16 mm |
| Tightening torque fastening screws | 1.2 Nm |
| Transmissible torque | 9 Nm |
| Design shape | Cylindrical with several screws |
| Hub surface pressure | 69 N/mm2 |
| Material | Steel |
| Self centering | Yes |
| Shaft surface pressure | 188 N/mm2 |
| Surface | Blank |
Description
Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm.
