MÄDLERMÄDLER· Locking Assemblies, Clamping Bushes, Taper Bushes
Locking assembly BAR bore 100mm
Manufacturer part no. 61550000
$210.39≈ 182.71 €
In stock — 1 unitslead time 14 d
Estimated landed cost
| Item | €182.71 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €39.54 |
| Total delivered | €237.25 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 2.9 kg |
Other characteristics
| Admissible axial force | 260 kN |
| Inner diameter | 100 mm |
| Length | 58 mm |
| No of bolts pcs | 8 |
| Outer diameter | 145 mm |
| Tightening torque fastening screws | 145 Nm |
| Transmissible torque | 11 790 Nm |
| Design shape | Cylindrical with several screws |
| Hub surface pressure | 186 N/mm2 |
| Material | Steel |
| Self centering | Yes |
| Shaft surface pressure | 265 N/mm2 |
| Surface | Blank |
Description
Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm.
