MÄDLERMÄDLER· Locking Assemblies, Clamping Bushes, Taper Bushes
Locking assembly COM-B bore 65mm size 65-84
Manufacturer part no. 61566500
$111.26≈ 96.62 €
In stock — 3 unitslead time 14 d
Estimated landed cost
| Item | €96.62 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €22.32 |
| Total delivered | €133.94 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 1.9 kg |
Other characteristics
| Admissible axial force | 99 kN |
| Inner diameter | 65 mm |
| Length | 80 mm |
| Outer diameter | 84 mm |
| Tightening torque fastening screws | 41 Nm |
| Transmissible torque | 3 190 Nm |
| Bolts 12 9 no x size | 9 x M8 |
| Design shape | With flange, mechanical |
| Hub surface pressure | 57 N/mm2 |
| Material | Steel |
| Self centering | Yes |
| Shaft surface pressure | 73 N/mm2 |
| Surface | Blank |
Description
Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts – Fastening Torque T – Transmittable Torque F – Transmittable Axial Force P – Surface Pressure onto Hub
