MÄDLERMÄDLER· Locking Assemblies, Clamping Bushes, Taper Bushes
Clamping bush MSM-N stainless steel bore 10mm max. torque 23Nm
Manufacturer part no. 61599210
$86.83≈ 75.41 €
In stock — 2 unitslead time 14 d
Estimated landed cost
| Item | €75.41 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €18.08 |
| Total delivered | €108.49 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Torque | 234.531 kg·cm |
| Weight | 50 g |
Other characteristics
| Admissible axial force | 4.4 kN |
| Inner diameter | 10 mm |
| Length | 24 mm |
| No of bolts pcs | 3 |
| Outer diameter | 16 mm |
| Tightening torque fastening screws | 2.7 Nm |
| Transmissible torque | 23 Nm |
| Design shape | With flange, hydraulic |
| Hub surface pressure | 70 N/mm2 |
| Material | Stainless steel (303) |
| Self centering | Yes |
| Shaft surface pressure | 90 N/mm2 |
Description
Material: Stainless steel 1.4305 (AISI 303). Concentricity: about 0,02 mm. Tolerance: Shaft k6-h10, Hub H8. Mounting: The bush is mounted quickly. Just place the bush inside the hub and push both onto the shaft. Fasten with Allen key. Demounting: Remove tensioning screws. Put screws in forcing thread and fasten them until the bush is pressed off. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly.
