MÄDLERMÄDLER· Locking Assemblies, Clamping Bushes, Taper Bushes
Locking assembly BAR stainless steel 1.4401 bore 14mm
Manufacturer part no. 61599414
$136.07≈ 118.17 €
In stock — 5 unitslead time 14 d
Estimated landed cost
| Item | €118.17 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €26.63 |
| Total delivered | €159.80 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 39 g |
Other characteristics
| Admissible axial force | 1.9 kN |
| Inner diameter | 14 mm |
| Length | 17 mm |
| No of bolts pcs | 4 |
| Outer diameter | 26 mm |
| Tightening torque fastening screws | 0.9 Nm |
| Transmissible torque | 13 Nm |
| Design shape | Cylindrical with several screws |
| Hub surface pressure | 15 N/mm2 |
| Material | Stainless steel (316) |
| Self centering | Yes |
| Shaft surface pressure | 28 N/mm2 |
| Surface | Blank |
| Thread size | M 3 x 16 |
| Type | BAR Stainless |
Description
Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm.
