MÄDLERMÄDLER· Locking Assemblies, Clamping Bushes, Taper Bushes
Locking assembly COM-A stainless steel 1.4401 bore 25mm size 25-50
Manufacturer part no. 61599525
$93.37≈ 81.09 €
In stock — 4 unitslead time 14 d
Estimated landed cost
| Item | €81.09 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €19.22 |
| Total delivered | €115.31 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 220 g |
Other characteristics
| Admissible axial force | 17 kN |
| Inner diameter | 25 mm |
| Length | 20 mm |
| Outer diameter | 50 mm |
| Tightening torque fastening screws | 8 Nm |
| Transmissible torque | 230 Nm |
| Bolts no x size | 8 x M6 |
| Design shape | Cylindrical with several screws |
| Hub surface pressure | 54 N/mm2 |
| Material | Stainless steel (316) |
| Self centering | No |
| Shaft surface pressure | 108 N/mm2 |
| Surface | Blank |
Description
Material: Stainless steel 1.4401 (AISI 316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts – Fastening Torque T – Transmittable Torque F – Transmittable Axial Force P – Surface Pressure onto Hub
