MÄDLERMÄDLER· Locking Assemblies, Clamping Bushes, Taper Bushes
Taper-bush 4545 bore 60mm
Manufacturer part no. 62251560
$191.96≈ 166.70 €
In stock — 1 unitslead time 14 d
Estimated landed cost
| Item | €166.70 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €36.34 |
| Total delivered | €218.04 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 12.8 kg |
Other characteristics
| Bore | 60 mm |
| Clamp bushing type | 4 545 |
| Depth of keyway | 4.4 mm |
| Keyway width | 18 mm |
| Length | 114 mm |
| Outer diameter | 162 mm |
| Material | Grey cast iron (A48) |
| Surface | Blank |
Description
Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 515 99, order quantity as needed). Screw size BSW 3/4" x 2". Spanner size 14mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 190 Nm. Slip torque without keyway: bore 55 mm: 1840 Nm; bore 75mm: 3000 Nm; bore 100mm: 4500 Nm
