MÄDLERMÄDLER· Locking Assemblies, Clamping Bushes, Taper Bushes
Taper-bush 5050 bore 100mm
Manufacturer part no. 62251691
$249.94≈ 217.06 €
In stock — 1 unitslead time 14 d
Estimated landed cost
| Item | €217.06 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €46.41 |
| Total delivered | €278.47 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 13.1 kg |
Other characteristics
| Bore | 100 mm |
| Clamp bushing type | 5 050 |
| Depth of keyway | 6.4 mm |
| Keyway width | 28 mm |
| Length | 127 mm |
| Outer diameter | 178 mm |
| Material | Grey cast iron (A48) |
| Surface | Blank |
Description
Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 516 99, order quantity as needed). Screw size BSW 7/8" x 2 1/4". Spanner size 14 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 270 Nm. Slip torque without keyway: bore 75 mm: 3250 Nm; bore 100 mm: 4800 Nm; bore 125 mm: 5900 Nm
