MÄDLERMÄDLER· Fastening Elements
Rubber pad for collars type B1 with bore 28mm
Manufacturer part no. 62312899
$2.34≈ 2.03 €
In stock — 6 unitslead time 14 d
Estimated landed cost
| Item | €2.03 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €3.41 |
| Total delivered | €20.44 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 6.2 g |
Other characteristics
| Nominal size | 28 |
| Material | NBR |
| Surface | Blank |
Description
Material: Rubber NBR, black, 70º +/-5º Shore A. These oil-resistant rubber pads can be cliped into the axial bores of the MÄDLER® shaft collars type B1. The rubber pads enable a careful and vibration-damping clamping of a machine component on a shaft. For mounting, the pins should be lubricated with oil or grease. At collars from stainless steel, tire mounting paste or alternatively hand dishwashing detergent can also be used.
Similar products
MÄDLERIn stock
Edge trim PVC/EPDM application range 1,0 – 4,0 mm total height 16mm total width 20.5mm
€10.56$12.16
View at seller ↗
MÄDLERIn stock
Edge trim PVC/EPDM application range 1.0 – 4.0 mm total height 16.4mm total width 24.7mm
€10.69$12.31
View at seller ↗
MÄDLERIn stock
Edge trim PVC/EPDM application range 1.0 – 4.0 mm total height 21mm total width 10.4mm
€9.08$10.46
View at seller ↗
MÄDLERIn stock
Edge trim PVC black application range 4.0 – 6.0 mm height 16.6mm width 11.5mm
€9.18$10.57
View at seller ↗
