MÄDLERMÄDLER· Fastening Elements
Clamp collar single-split stainless steel 1.4305 bore 14mm with bolt DIN 912 A2-70 type GA
Manufacturer part no. 62399114GA
$24.04≈ 20.88 €
In stock — 5 unitslead time 14 d
Estimated landed cost
| Item | €20.88 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €7.18 |
| Total delivered | €43.06 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 49 g |
Other characteristics
| Bore diameter | 14 mm |
| Max outer diameter over screw head | 33.9 mm |
| Mounting hole center distance | 23 mm |
| Outer diameter | 32 mm |
| Width | 11 mm |
| Material | Stainless steel (303) |
| Screw din 912 thread size x length | M 4 x 14 |
| Surface | Blank |
| Thread size | M 4 mm |
Description
Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide. Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores.
Similar products
MÄDLERIn stock
Edge trim PVC/EPDM application range 1,0 – 4,0 mm total height 16mm total width 20.5mm
€10.56$12.16
View at seller ↗
MÄDLERIn stock
Edge trim PVC/EPDM application range 1.0 – 4.0 mm total height 16.4mm total width 24.7mm
€10.69$12.31
View at seller ↗
MÄDLERIn stock
Edge trim PVC/EPDM application range 1.0 – 4.0 mm total height 21mm total width 10.4mm
€9.08$10.46
View at seller ↗
MÄDLERIn stock
Edge trim PVC black application range 4.0 – 6.0 mm height 16.6mm width 11.5mm
€9.18$10.57
View at seller ↗
