Telescopic universal-joint shaft UW made from plastic/brass bore 10mm telescoped length 464mm max. travel 281mm

Specifications (automatically extracted)

Description

Material: acetal (black). Cross-pieces: brass. Joint faces are fitted with brass inserts, with 2 set screws per hub. Temperature range: -20°C to + 60°C. To shorten the teleshafts, please always cut off the same length on either side. * The stated peak torque refers to Lmin. (telescope retracted). The max. torque for extended telescope has to be determined empirically and subject to the respective application. ** Bore-reducing bushes see below. 1) Joint faces fitted with brass inserts with 2 set screws per hub. 2) Joints only fitted with metal inserts, without set screws.

Similar products

Compare

MÄDLERIn stock

Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 14H7 with keyway DIN 6885-1 on both sides min. length 220mm max. length 270mm

€532.82$613.54

View at seller ↗

Compare

MÄDLERIn stock

Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 14H7 on both sides min. length 220mm max. length 270mm

€411.85$474.25

View at seller ↗

Compare

MÄDLERIn stock

Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 10H7 on both sides min. length 170mm max. length 200mm

€398.46$458.83

View at seller ↗

Compare

MÄDLERIn stock

Slip shaft with joints PWR both sides bore 25H7 min. length 380mm max. length 430mm stainless steel 1.4301 outer diameter 50mm

€645.15$742.89

View at seller ↗

Compare

MÄDLERIn stock

Slip shaft with joints PWR both sides bore 22H7 min. length 355mm max. length 405mm stainless steel 1.4301 outer diameter 47mm

€577.47$664.96

View at seller ↗

Compare

MÄDLERIn stock

Slip shaft with joints PWR both sides bore 20H7 min. length 315mm max. length 365mm stainless steel 1.4301 outer diameter 40mm

€467.16$537.94

View at seller ↗