Ball joint RW bore 14H7 with keyway DIN 6885-1 on both sides outer diameter 28mm steel

Specifications (automatically extracted)

Description

Material: Steel 11SMn30 (1.0715). Max. Operating Angle 35°. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C.

Similar products

Compare

MÄDLERIn stock

Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 14H7 with keyway DIN 6885-1 on both sides min. length 220mm max. length 270mm

€532.82$613.54

View at seller ↗

Compare

MÄDLERIn stock

Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 14H7 on both sides min. length 220mm max. length 270mm

€411.85$474.25

View at seller ↗

Compare

MÄDLERIn stock

Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 10H7 on both sides min. length 170mm max. length 200mm

€398.46$458.83

View at seller ↗

Compare

MÄDLERIn stock

Slip shaft with joints PWR both sides bore 25H7 min. length 380mm max. length 430mm stainless steel 1.4301 outer diameter 50mm

€645.15$742.89

View at seller ↗

Compare

MÄDLERIn stock

Slip shaft with joints PWR both sides bore 22H7 min. length 355mm max. length 405mm stainless steel 1.4301 outer diameter 47mm

€577.47$664.96

View at seller ↗

Compare

MÄDLERIn stock

Slip shaft with joints PWR both sides bore 20H7 min. length 315mm max. length 365mm stainless steel 1.4301 outer diameter 40mm

€467.16$537.94

View at seller ↗