MÄDLERMÄDLER· Universal Joints
Precision double universal joint WD DIN808 double bore 22H7 material steel total length 145mm outer diameter 40mm
Manufacturer part no. 63174700
$178.64≈ 155.14 €
In stock — 1 unitslead time 14 d
Estimated landed cost
| Item | €155.14 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €34.03 |
| Total delivered | €204.17 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 940 g |
Other characteristics
| Bore | 22 mm |
| Max torque at 100 min 1 | 312 Nm |
| Max torque at 200 min 1 | 218.4 Nm |
| Max torque at 300 min 1 | 156 Nm |
| Max torque at 400 min 1 | 124.8 Nm |
| Max torque at 500 min 1 | 109.2 Nm |
| Max torque at 700 min 1 | 78 Nm |
| Outer diameter | 40 mm |
| Total length | 145 mm |
| Material | Steel |
| Surface | Blank |
Description
Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints – this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides.
Similar products
MÄDLERIn stock
Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 14H7 with keyway DIN 6885-1 on both sides min. length 220mm max. length 270mm
€532.82$613.54
View at seller ↗MÄDLERIn stock
Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 14H7 on both sides min. length 220mm max. length 270mm
€411.85$474.25
View at seller ↗MÄDLERIn stock
Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 10H7 on both sides min. length 170mm max. length 200mm
€398.46$458.83
View at seller ↗
MÄDLERIn stock
Slip shaft with joints PWR both sides bore 25H7 min. length 380mm max. length 430mm stainless steel 1.4301 outer diameter 50mm
€645.15$742.89
View at seller ↗