MÄDLERMÄDLER· Universal Joints
Precision single universal joint WER DIN 808 simple, bore 16H7 stainless steel 1.4301 total length 95mm outer diameter 32mm
Manufacturer part no. 63199232
$81.25≈ 70.56 €
In stock — 7 unitslead time 14 d
Estimated landed cost
| Item | €70.56 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €17.11 |
| Total delivered | €102.67 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 420 g |
Other characteristics
| Bore | 16 mm |
| Max torque at 100 min 1 | 67.5 Nm |
| Max torque at 200 min 1 | 63 Nm |
| Max torque at 300 min 1 | 52.9 Nm |
| Max torque at 400 min 1 | 42 Nm |
| Max torque at 500 min 1 | 37.9 Nm |
| Max torque at 700 min 1 | 30 Nm |
| Max torque at 800 min 1 | 25.9 Nm |
| Outer diameter | 32 mm |
| Total length | 95 mm |
| Material | Stainless steel (304) |
| Surface | Blank |
Description
Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides.
Similar products
MÄDLERIn stock
Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 14H7 with keyway DIN 6885-1 on both sides min. length 220mm max. length 270mm
€532.82$613.54
View at seller ↗MÄDLERIn stock
Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 14H7 on both sides min. length 220mm max. length 270mm
€411.85$474.25
View at seller ↗MÄDLERIn stock
Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 10H7 on both sides min. length 170mm max. length 200mm
€398.46$458.83
View at seller ↗
MÄDLERIn stock
Slip shaft with joints PWR both sides bore 25H7 min. length 380mm max. length 430mm stainless steel 1.4301 outer diameter 50mm
€645.15$742.89
View at seller ↗