MÄDLERMÄDLER· Universal Joints
Precision double universal joint WDR DIN 808 bore 16H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301
Manufacturer part no. 63199732N
$161.34≈ 140.11 €
In stock — 1 unitslead time 14 d
Estimated landed cost
| Item | €140.11 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €31.02 |
| Total delivered | €186.13 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 430 g |
Other characteristics
| Bore | 16 mm |
| Keyway width | 5 mm |
| Max torque at 100 min 1 | 49.5 Nm |
| Max torque at 200 min 1 | 31.9 Nm |
| Max torque at 300 min 1 | 28.9 Nm |
| Max torque at 400 min 1 | 26.4 Nm |
| Max torque at 500 min 1 | 24.4 Nm |
| Max torque at 700 min 1 | 19.9 Nm |
| Max torque at 800 min 1 | 18.9 Nm |
| Outer diameter | 29 mm |
| Total length | 125 mm |
| Material | Stainless steel (304) |
| Surface | Blank |
Description
Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques only amount to 90% of the single precision universal joints, stainless. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides.
Similar products
MÄDLERIn stock
Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 14H7 with keyway DIN 6885-1 on both sides min. length 220mm max. length 270mm
€532.82$613.54
View at seller ↗MÄDLERIn stock
Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 14H7 on both sides min. length 220mm max. length 270mm
€411.85$474.25
View at seller ↗MÄDLERIn stock
Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 10H7 on both sides min. length 170mm max. length 200mm
€398.46$458.83
View at seller ↗
MÄDLERIn stock
Slip shaft with joints PWR both sides bore 25H7 min. length 380mm max. length 430mm stainless steel 1.4301 outer diameter 50mm
€645.15$742.89
View at seller ↗