MÄDLERMÄDLER· Fastening Elements
Internal tab washer DIN 462 inner-ø 60mm plain steel
Manufacturer part no. 65266001
$5.68≈ 4.93 €
In stock — 4 unitslead time 14 d
Estimated landed cost
| Item | €4.93 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €3.99 |
| Total delivered | €23.92 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 29 g |
Other characteristics
| Shaft keyway | 10 |
| Material | Steel |
| Suitable to din 1804 | M 60×1.5 |
| Surface | Blank |
Description
Material: Steel. Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread. After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut.
Similar products
MÄDLERIn stock
Edge trim PVC/EPDM application range 1,0 – 4,0 mm total height 16mm total width 20.5mm
€10.56$12.16
View at seller ↗
MÄDLERIn stock
Edge trim PVC/EPDM application range 1.0 – 4.0 mm total height 16.4mm total width 24.7mm
€10.69$12.31
View at seller ↗
MÄDLERIn stock
Edge trim PVC/EPDM application range 1.0 – 4.0 mm total height 21mm total width 10.4mm
€9.08$10.46
View at seller ↗
MÄDLERIn stock
Edge trim PVC black application range 4.0 – 6.0 mm height 16.6mm width 11.5mm
€9.18$10.57
View at seller ↗
