MÄDLERMÄDLER· Fastening Elements
Split pin DIN EN ISO 1234 (ex DIN 94) 3,2 x 40 zinc plated
Manufacturer part no. 65313240
$0.45≈ 0.39 €
In stock — 10 unitslead time 14 d
Estimated landed cost
| Item | €0.39 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €3.08 |
| Total delivered | €18.47 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Other characteristics
| Head length approx | 6.4 mm |
| Length | 40 mm |
| Nominal size | 3.2 |
| Weight per 100 pcs | 250 g |
| Material | Steel |
| Suitable for bolt diameter | 9 – 12 mm |
| Suitable for screw diameter | 11 – 14 mm |
| Surface | Zinc-plated |
Description
Material: Steel, zinc-plated. These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part.
Similar products
MÄDLERIn stock
Edge trim PVC/EPDM application range 1,0 – 4,0 mm total height 16mm total width 20.5mm
€10.56$12.16
View at seller ↗
MÄDLERIn stock
Edge trim PVC/EPDM application range 1.0 – 4.0 mm total height 16.4mm total width 24.7mm
€10.69$12.31
View at seller ↗
MÄDLERIn stock
Edge trim PVC/EPDM application range 1.0 – 4.0 mm total height 21mm total width 10.4mm
€9.08$10.46
View at seller ↗
MÄDLERIn stock
Edge trim PVC black application range 4.0 – 6.0 mm height 16.6mm width 11.5mm
€9.18$10.57
View at seller ↗
