MÄDLERMÄDLER· Fastening Elements
Hinge M237 zinc die casting, type 2C, 76x50mm
Manufacturer part no. 67700357
$21.02≈ 18.25 €
In stock — 3 unitslead time 14 d
Estimated landed cost
| Item | €18.25 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €6.65 |
| Total delivered | €39.90 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 145 g |
| Dimensions | 76x50mm |
Other characteristics
| Length | 76 mm |
| Max axial force | 1 200 N |
| Max radial force at opening angle 90 | 2 000 N |
| Shape | 2 C |
| Total height | 11.5 mm |
| Width | 50 mm |
| Material | Zinc die-cast / Stainless steel |
| Surface | Matt finish |
| Thread size | M 6 mm |
Description
Material: Zinc die cast, plastic coated, black, textured finish. Pin: Stainless steel 1.4305. Threaded bolts (type C): Stainless steel 1.4401 This non-detachable hinges are extended on one side (1) or two sides (2). With countersunk holes for screws DIN 7991 (Type A) or threaded bolts (Type C). Type 1A: extended on one side, with sunkholes. Type 1C: extended on one side, with threaded bolts. Type 2A: extended on both sides, with sonkholes. Type 2C: extended on both sides, with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability.
Similar products
MÄDLERIn stock
Edge trim PVC/EPDM application range 1,0 – 4,0 mm total height 16mm total width 20.5mm
€10.56$12.16
View at seller ↗
MÄDLERIn stock
Edge trim PVC/EPDM application range 1.0 – 4.0 mm total height 16.4mm total width 24.7mm
€10.69$12.31
View at seller ↗
MÄDLERIn stock
Edge trim PVC/EPDM application range 1.0 – 4.0 mm total height 21mm total width 10.4mm
€9.08$10.46
View at seller ↗
MÄDLERIn stock
Edge trim PVC black application range 4.0 – 6.0 mm height 16.6mm width 11.5mm
€9.18$10.57
View at seller ↗
