MÄDLERMÄDLER· Fastening Elements
Hinge M238 zinc die casting, adjustable, 42x42mm
Manufacturer part no. 67700401
$17.88≈ 15.53 €
In stock — 4 unitslead time 14 d
Estimated landed cost
| Item | €15.53 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €6.11 |
| Total delivered | €36.64 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 54 g |
| Dimensions | 42x42mm |
Other characteristics
| Bore diameter | 5.3 mm |
| Max axial force | 1 050 N |
| Max radial force at opening angle 90 | 2 100 N |
| Total height | 11 mm |
| Width | 42 mm |
| Material | Zinc die-cast / Plastic |
| Surface | Plastic coated, matt finish |
Description
Material: Zinc die cast, plastic coated black RAL 9005, textured finish. Plastic cover balck-grey. Pin: Stainless steel 1.4305. Adjusting discs: Steel, hardened. These adjustable, non-detachable hinges allow a very precise positioning of the door or cover. The adjusting discs have a cutting ring at the bottom, which cuts into the ribs of die cast zinc-wing when tightening the countersunk screw. That prevents an unintentional move after assembly. The screws are covered by a perfectly fitting lid. Type B: adjustable in both directions. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability.
Similar products
MÄDLERIn stock
Edge trim PVC/EPDM application range 1,0 – 4,0 mm total height 16mm total width 20.5mm
€10.56$12.16
View at seller ↗
MÄDLERIn stock
Edge trim PVC/EPDM application range 1.0 – 4.0 mm total height 16.4mm total width 24.7mm
€10.69$12.31
View at seller ↗
MÄDLERIn stock
Edge trim PVC/EPDM application range 1.0 – 4.0 mm total height 21mm total width 10.4mm
€9.08$10.46
View at seller ↗
MÄDLERIn stock
Edge trim PVC black application range 4.0 – 6.0 mm height 16.6mm width 11.5mm
€9.18$10.57
View at seller ↗
