HiwonderHiwonder· Commande de moteurs
Hiwonder Digital Servo Tester Controller with Voltage Display
Réf. fabricant 13040034
9.99 $≈ 8.66 €
Le prix en résumé
Vendu par Hiwonder à 8.66 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 40.39 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
En stock
Coût total livré estimé
| Article | 8.66 € |
|---|---|
| Frais de port | 25.00 € |
| TVA (20 %) | 6.73 € |
| Total livré | 40.39 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 10 g |
Description
Two Power Supply Interfaces Two Power Supply Interfaces Product Parameters 1. High-precision potentiometer, which can control the servo in real-time. 2. On-board voltage display module, which can monitor the voltage of power supply equipment in real-time. 3. High-resolution PWM signal, on-board 8-bit MCU, can make the control accuracy higher. 4. Support manual servo controller/servo reset back to center, switch by reset buttons under servo control knob. 5. Servo controller accuracy: 0.09° (refers to the PWM limit small change value of 1us). 6. Two power supply equipment link interfaces. (5-8.4V) 7. On-board 2-channel PWM digital servo interface, which can be controlled by a high-precision potentiometer. 8. Size: 2*1.4inch / 50*35mm, Weight: 0.03 lb / 13.5g How to use: Supply power to the controller, the voltage can be 5~8.4V, the specific voltage is subject to the actual use of the servo's rated voltage; The servo is plugged into the 3Pin servo port. The power-on default potentiometer control mode, the servo rotates synchronously when the knob is turned; The button below the knob can switch the mode, press respectively to "Manual Mode": Knob control. "Neutral Mode": Return to the center position. Information of Controller "+" Positive Pole "-" Negative Pole "S" Signal Terminal Manual Mode: Knob Control. Neutral Mode: Return to Center Position. Voltage Real-time Monitoring Through the voltage display module, the voltage of the power supply equipment can be monitored in real time to prevent the voltage from being too low to continue to control and test the steering gear. Manually Control The Servo Through the high-precision potentiometer, the angle synchronous rotation of the 2 steering gears can be controlled in real time. Servo Return To Center Through the reset button, the angle of the 2-way servo can be reset to 90°. Robotic Arm Debugging Claw Debugging Servo Gimbal Debugging Servo Tester 1 Channels Servo Tester 6 Channels 20-60KG/180°-270° PWM Servo 35KG/180°-270
Produits similaires
HiwonderEn stock
Serial Bus Servo Controller: Hiwonder Serial Bus Servo Controller Communication Tester
34.66 €39.99 $
Voir chez le vendeur ↗
HiwonderEn stock
Hiwonder 6 Channel Digital Servo Tester with Over-Current Protection
16.46 €18.99 $
Voir chez le vendeur ↗
HiwonderEn stock
LSC-16: Hiwonder 16 Channel Servo Controller with Over-Current Protection
16.46 €18.99 $
Voir chez le vendeur ↗
