m5stackM5Stack· Robots & kits
M5Stack Core2 for AWS Kit v1.3
Réf. fabricant K010-AWS-V13
49.90 $≈ 43.24 €
Le prix en résumé
Vendu par 2 distributeurs, de 43.24 € à 47.96 €. Le prix affiché le plus bas est celui de m5stack, à 43.24 €. Une fois le port, la TVA et les droits de douane ajoutés, le moins cher livré est Farnell à environ 57.55 € — m5stack revient à environ 69.89 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
En stock
Coût total livré estimé
| Article | 43.24 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 11.65 € |
| Total livré | 69.89 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
2 offres pour ce produit
| Vendeur | Disponibilité | Prix | Lien vendeur |
|---|---|---|---|
| m5stackMeilleur coût livré | En stock | 49.90 $51.89 € TTC | Voir ↗ |
| Farnell | Sur commande· délai 57 j | 47.96 €57.55 € TTC | Voir ↗ |
Prix comparés TTC : certains vendeurs affichent des tarifs distributeur HT, d'autres des prix boutique TTC. Le badge signale le meilleur coût livré estimé, port et douane compris — pas toujours la première ligne.
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 138 g |
Description
Description Core2 For AWS v1.3 is a development kit designed for AWS IoT learning and security projects, consisting of the M5Stack Core2 main controller and the Base M5GO Bottom2 v1.3 expansion base with an integrated cryptographic chip. The main controller is built around the dual-core ESP32-D0WDQ6-V3 running at 240 MHz, equipped with 16MB Flash, 8MB PSRAM, and a 2.0-inch capacitive touchscreen with Wi-Fi connectivity. It features a built-in vibration motor, an RTC module, an AXP192 power management unit, and a green power indicator LED. A TF card slot is provided, along with an I2C audio amplifier and speaker. A power button is located on the left side, a reset button on the bottom, and three virtual programmable buttons on the front panel. The expansion base integrates an ATECC608 cryptographic chip, a BMI270 6-axis IMU, an SPM1423 digital microphone, and a 500mAh Li-ion battery. Two HY2.0-4P ports supporting ADC, DAC, and UART are provided. Ten SK6812 RGB LEDs with frosted light guides are distributed on both sides. The bottom features a Pogo Pin magnetic charging port with a built-in TP4057 charging IC, which also exposes the I2C bus. The base includes built-in magnets and LEGO-compatible mounting holes, with reserved footprints for a CP2104 and a Li-ion battery connector for future expansion. It is well-suited for smart home security terminal prototyping, trusted data acquisition at the edge, and cloud data upload. Note The vibration motor built into the M5Core2 physically conflicts with the M5 Base series expansion bases. To prevent device damage, do not stack the M5Core2 with any M5 Base series functional base. Some units may exhibit non-linear touch response near the screen edges. You can try upgrading the screen firmware using M5Tool to resolve this issue. Features ESP32-D0WDQ6-V3 main controller Built-in ATECC608 hardware cryptographic chip 16MB Flash 8MB PSRAM 2.4 GHz Wi-Fi Built-in speaker Power indicator LED Vibration motor RTC clock Capacitive touchsc