m5stackM5Stack· Cartes & informatique embarquée
M5Stack Tough ESP32 IoT Development Board Kit
Réf. fabricant K034
49.90 $≈ 43.24 €
Le prix en résumé
Vendu par m5stack à 43.24 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 69.89 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
En stock
Coût total livré estimé
| Article | 43.24 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 11.65 € |
| Total livré | 69.89 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 167 g |
Description
Description Tough is an industrial-grade programmable embedded controller. It is equipped with the Espressif ESP32 main control chip, which integrates Wi-Fi and features a dual-core low-power Xtensa® 32-bit LX6 microprocessor with a main frequency of up to 240MHz. The board includes 8M PSRAM + 16MB Flash memory, a 2.0-inch 320x240 full-color IPS display, a high-sensitivity capacitive touch panel, and a variety of peripheral and expansion interfaces. The fully enclosed casing offers dustproof and waterproof protection, ensuring stable circuit operation even in complex industrial environments. This controller is suitable for scenarios such as industrial field control, smart buildings, and outdoor data acquisition nodes. Note Do not immerse the casing in water. This product is not designed for immersion protection. Features Developed based on ESP32, supports Wi-Fi 16MB Flash + 8MB PSRAM Onboard microSD slot Built-in speaker, I2S power amplifier IPS display, capacitive touch AXP192 power management chip BM8563-RTC clock, supports RTC timer wake-up Integrated DC 6 ~ 24V to 5V DC-DC step-down circuit Dustproof and waterproof design, UV-resistant plastic Supports FreeRTOS Development Platform UiFlow1 UiFlow2 Arduino IDE ESP-IDF PlatformIO Includes 1 x Tough 1 x USB Type-C cable (1m) 1 x 2.5mm hex wrench 1 x 1.5mm hex wrench 1 x 1.25-2P single-ended terminal wire 1 x 1.25-4P single-ended terminal wire 1 x Waterproof O-ring 1 x HY2.0-4P connector Applications IoT Controller Data Acquisition Timer Controller Specifications Specification Parameter SoC ESP32-D0WDQ6-V3@dual-core processor, main frequency 240MHz SRAM 520KB Flash 16MB PSRAM 8MB Wi-Fi 2.4 GHz Wi-Fi Input Voltage USB (5V@500mA) / RS485 interface power input (6 ~ 24V@1A) Interfaces USB Type-C x 1, HY2.0-4P x 4 (RS485 / I2C / GPIO / UART interfaces) IPS LCD 2.0" 320 x 240 ILI9342C full-color display, max brightness 853 nits Touch Controller CHSC6540 Speaker Setup NS4168 16-bit I2S amplifier + 1W speaker RTC Clock Chip
