m5stackM5Stack
Isolated RS485 Unit
Réf. fabricant U094
9.95 $≈ 8.62 €
Le prix en résumé
Vendu par m5stack à 8.62 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 28.34 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
En stock
Coût total livré estimé
| Article | 8.62 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 4.72 € |
| Total livré | 28.34 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 30 g |
Description
Description Unit RS485-ISO is an isolated half-duplex transceiver based on the RS485 bus protocol. It can convert TTL level to RS485 level. In the communication link of devices, various electrical noises and transient changes in voltage and current may occur. Using the CA-IS3082W as the interface chip can effectively shield these noises and transients, providing full protection for expensive control equipment and reducing the risk of damage. It communicates with RS485 devices on the other end, making it suitable for long-distance signal transmission. This product features fail-safe protection; in the receiving state, if the input is open or shorted, the receiver outputs a high level. RS485 is a communication protocol standard that defines the electrical characteristics of drivers and receivers for serial communication systems, supporting multi-point systems and used in industrial fields. When project equipment requires RS485 communication control and has high requirements for signal-to-noise ratio and transmission distance, using Unit RS485-ISO for interface type conversion is a good choice. Features Built-in CA-IS3082W isolation chip Isolated DC-DC Signal transmission rate: Up to 500 Kbps Fail-safe receiver (bus open, short circuit) Supports up to 256 bus nodes Isolation withstand voltage up to 1000 VRMS Development platforms: Arduino, UIFlow (Blockly, Python) 2 x LEGO compatible holes Includes 1 x Unit RS485-ISO 1 x VH-3.96 4p 1 x 120Ω resistor 1 x HY2.0-4P Grove cable (20cm) 1 x I/O Sticker Applications Communication between RS485 interface devices and microcontrollers in industrial equipment Specifications Specification Parameter Withstand Voltage 1000V Maximum Nodes 256 ESD ±15KV Protection Features Fail-safe, Overcurrent protection, Thermal shutdown protection Product Size 56.0 x 24.0 x 10.2mm Product Weight 9.1g Package Size 138.0 x 93.0 x 11.2mm Gross Weight 17.8g Learn and Documents → DOCUMENTS
