elecfreaksElecfreaks· Cartes & informatique embarquée
ELECFREAKS Octopus Soil Moisture Sensor
Réf. fabricant EF04027
2.90 $≈ 2.51 €
Réf. fabricant EF04027
Vendu par elecfreaks à 2.51 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 21.01 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 2.51 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 3.50 € |
| Total livré | 21.01 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 10 g |
Octopus Soil Moisture Sensor Brick can read the amount of moisture present in the soil surrounding it. It's a low-tech sensor, but ideal for monitoring an urban garden, or your pet plant's water level. This is a must-have tool for a connected garden! This sensor uses the two probes to pass current through the soil, and then it reads that resistance to get the moisture level. More water makes the soil conduct electricity more easily (less resistance), while dry soil conducts electricity poorly (more resistance). It will be helpful to remind you to water your indoor plants or to monitor the soil moisture in your garden. The Freaduino Sensor Shield is the perfect shield to connect this sensor to Arduino. Or Freaduino UNO which we had a pre-stray Octopus Brick interface. OUTLOOK & DIMENSIONS SPECIFICATION Power supply: 3.3v or 5v Output voltage signal: 0~4.2v Current: 35mA Pin definition: Analog output(Yellow wire) GND(Black wire) Power(Red wire) PACKAGE LIST Module Quantity Moisture sensor Brick 1 Analog Sensor Cable 1 HARDWARE CONNECTION Connection note: Connect this module to the P1 port on octopus:bit. PROGRAMMING STEP 1 Click "Advanced"in the choice of the MakeCode to find more choices. STEP 2 Click "Extensions", search "iot"in the dialog box and then download it. CODE Program links You can also download it directly from below: RESULTS Insert this module into the soil, the value of the soil moisture content can be seen on the micro:bit.
