52pi52Pi· Cartes & informatique embarquée
52Pi ICE-Tower CPU Cooling Fan V2.0 for Raspberry Pi 4 B / 3B+ (Black)
Réf. fabricant EP-0111
12.48 $≈ 10.87 €
Réf. fabricant EP-0111
Vendu par 52pi à 10.87 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 31.04 €. Prix relevés le 2026-09-18.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 10.87 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 5.17 € |
| Total livré | 31.04 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 180 g |
[Description] According to Moore's law, the design of high-speed and high-density printed circuit board (PCB) is becoming more and more complex. Higher processing performance will generate more heat. This super ICE Tower CPU Cooling Fan for Raspberry Pi is burned for solving heat dissipation problem! Tower structure, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi. In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃. Best of all, this super cooling fan support both Raspberry Pi 3 and the new Raspberry Pi 4. When the fan turns up, you will see 7 colors. [Features] DC 5V Power in (Can be powered by the Raspberry Pi) Ice Tower Structure 5mm copper tube Super heat dissipation Rated power 0.4W @5V, 0.08A Super Cool fan background light (7 Colors) Easy to setup [52Pi WiKi] It is recommended to use the Raspberry Pi official system, please refer to the wiki EP-0111 - 52Pi Wiki [Package Includes] Only the ice tower cooling fan bundle: Note: the power supply and Raspberry Pi board are not included! 1 x Ice Tower radiator and Fan 1 x 4010 Black No Light Cooling Fan 2 x Steel Mounting Fixer (Fit for Raspberry Pi 3B+） 2 x Steel Mounting Fixer (Fit for Raspberry Pi 4B) 2 x M2x4 Screws 4 x M2.5x6 Copper sticks 4 x M2.5 Nuts 4 x M2.5x4 screws 3 x Thermal Tape 1 x Screw Driver 1 x Acrylic Bracket [How to assemble] Raspberry Pi 3B+ 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws 2. Fixed the steel mounting fixer to Raspberry Pi 3B+’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly. 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts. 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin. Raspberry Pi 4B 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws 2. Fixed the steel mounting fixer to Raspberry