
Réf. fabricant FNK0080
Vendu par freenove à 10.54 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 30.65 €. Prix relevés le 2026-09-29.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 10.54 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 5.11 € |
| Total livré | 30.65 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 63 g |
Overview: This breakout board can help you wire and know the status of the GPIO. Just mount this board on your Raspberry Pi with a few screws and standoffs. We provide free technical support to help you with any questions and problems. Compatible Models: * Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero Note: NOT compatible with Raspberry Pi 500 / 400. Main Features: * Tutorial Can be downloaded (in English) or viewed online (original in English, can be translated into other languages by browsers). Including step-by-step guide to show how to use. The tutorial link can be found on the product box. (No paper tutorial.) http://freenove.com/fnk0080 * GPIO status LED LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level. * Independent LED The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected. * Terminal block and header Connect to all pins of the main board, 2.54 mm (0.1 inch) pitch. * GPIO name The BCM numbering name of each pin is printed next to it. Package Includes: 1 x Breakout board 1 x Slotted screwdriver 1 x Cross screwdriver 5 x M2.5*12 standoff 10 x M2.5*4 screw