betafpvBetaFPV
F4 2-3S 20A AIO FC V1
Réf. fabricant 01040015_1
54.99 $≈ 47.90 €
Le prix en résumé
Vendu par betafpv à 47.90 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 75.48 €. Prix relevés le 2026-09-18.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
Disponibilité inconnue
Coût total livré estimé
| Article | 47.90 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 12.58 € |
| Total livré | 75.48 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Caractéristiques (extraites automatiquement)
Électrique
| Courant | 20 A |
Mécanique
| Poids | 22 g |
Description
F4 2-3S 20A AIO FC V1 is specifically designed for HD VTX, utilizing 2-3S batteries for enhancing the flight experience. It features a dual BEC solution that delivers stable power outputs of 9V@2A for DJI O3 and 5V@3A for external devices. With a 20A ESC, it enables agile flight and increases dynamic. And connector for DJI O3 HD VTX and USB port for easy installation and maintenance. Ideal for HD VTX whoop enthusiasts, offering a heightened level of professionalism and convenience with this FC option. Bullet Point Designed for HD VTX, it features a dual 9V@2A for DJI O3 and 5V@3A for external device BEC solution to prevent screen blackout on the DJI O3 due to low voltage during throttle increase. It includes a new DJI O3 6-pin PMU for easy installation without soldering, reducing assembly complexity. Newbie friendly. The power range of 2-3S provides increased thrust and improved control with a 20A ESC featuring a single NMOS for continuous current capability. The upgraded onboard receiver allows selective power cutoff for saving power and offers additional UART TX3 and RX3 ports for connecting the external device. Redesigned solder pad layout ensures larger, more secure pads for easy and reliable soldering, while the relocated USB port at the rear facilitates computer tuning. It features an STM32F405RGT6 chip, Integrate Serial ELRS 2.4G receiver, 16M black box, barometer, current meter, reserve 3 complete serial ports and a standard SBUS, support GPS, HD VTX, external receiver, and other equipment. Specification Weight: 5.58g (without motor connectors and power cable),5.92g (with motor connectors) Mounting Hole Size: 26mm x 26mm CPU*: STM32F405RGT6 (168MHz) Six-Axis: ICM42688P/ICM42605 (SPI connection) RX: Serial ELRS 2.4G Receiver RX firmware version: BETAFPV AIO 2400 RX ELRS V3.3.0 Antenna: Enameled wire Blackbox Memory: 16MB Sensor: Barometer (BMP280/DSP310), Voltage & Current 5V BEC*: 5V 3A@8V supply 9V BEC*: 9V 2A@8V supply USB Port: SH1.0 4-Pin Built-in ESC wi
