betafpvBetaFPV
F4 1S 5A AIO Brushless Flight Controller
Réf. fabricant 01040013_1
39.99 $≈ 34.66 €
Le prix en résumé
Vendu par betafpv à 34.66 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 59.59 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
Disponibilité inconnue
Coût total livré estimé
| Article | 34.66 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 9.93 € |
| Total livré | 59.59 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Caractéristiques (extraites automatiquement)
Électrique
| Courant | 5 A |
Mécanique
| Poids | 100 g |
Description
The F4 1S 5A AIO Brushless Flight Controller is back in stock with new and upgraded features. The new board integrates Serial ExpressLRS 2.4G receiver. Compared with the original built-in SPI ELRS 2.4G receiver, it could flash the newest ELRS official firmware like V3.0 easily. Also, we updated the FC with high-quality BMI270 gyro, BB51 ESC hardware with Bluejay ESC firmware, and 8MB Betaflight Blackbox flash. Please click here to F4 1S 5A AIO (SPI ELRS 2.4G) if you need information about it. Tons of ExpressLRS items are available now! Two version choices for the FC board. Weighing only 2.96 grams, the Light version comes with NO motor connectors soldered. Therefore, pilots could directly solder the motor cables to the FC board, getting an ultimate lightweight drone for fast speed FPV racing. Light Version Classical Version Weight 2.96g 3.64g Board Thickness 0.8mm 0.8mm Motor Connectors Not Solder Soldered Bullet Point Come with a Serial ExpressLRS 2.4G receiver, which can be updated via Wi-Fi or Betaflight serial passthrough. It is convenient for pilots to flash any version of ELRS RX firmware and especially can flash ExpressLRS V3.0 without updating flight controller firmware. The SPI Frsky version board reserves an SBUS port and a UART port, which is available for the SBUS protocol receiver or other external receivers. Built-in an 8MB flash memory chip dedicated to Blackbox logging. It’s an extremely powerful tool for tuning and troubleshooting an FPV drone. Particular design with a weight of 3.64g (Classical) and 2.96g (Light), reasonable layout, and easy to build. With a 26*26mm mounting hole size, it is fully compatible with the whoop frame in the current market. The Light version requires soldering motor wires to the pad directly, which allows lower resistance for more current on motors. It also comes with motor pin connectors for convenience to use. Specification of FC CPU: STM32F411CEU6 (100MHZ) Six-Axis: BMI270 Built-in Receiver: Serial ExpressLRS 2.4G/SPI
