betafpvBetaFPV
F411 4S 20A Toothpick Brushless Flight Controller V5 BLHeli_S (BMI270)
Réf. fabricant 01040011_1
35.99 $62.99 $−43 %≈ 31.19 €
Le prix en résumé
Vendu par betafpv à 31.19 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 55.43 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
Disponibilité inconnue
Coût total livré estimé
| Article | 31.19 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 9.24 € |
| Total livré | 55.43 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Caractéristiques (extraites automatiquement)
Électrique
| Courant | 20 A |
Mécanique
| Poids | 100 g |
Description
As a continuance of the F411 chip, the V5 FC board is upgraded from the F4 20A V3 FC board. F411 4S 20A Toothpick Brushless Flight Controller V5 adopts BMI270 gyro instead of MPU6000 on V3 board. With two integrated plug&play ports for receiver and HD digital VTX, it is easy to install and requires less solder work. Besides, the board is a solid value for durable use thanks to the high-quality PCB material and enhanced production process. Bullet Point With a large pad to solder, it is easy to solder external electronics. In addition, the V5 board features plug&play ports for the receiver and HD digital VTX, which requires less solder work for convenient installation. High-quality MOSFETs are applied to F411 4S 20A FC V5 to handle 20A continuous current and reach 25A peak current. The motor solder pads are reinforced by thick copper and edge plating technology, allowing lower resistance for more current on motors. F411 4S 20A FC V5 reserves the UART ports layout, UART1 for RX, UART2 for DJI OSD or Analog VTX, and UART6 for spare usage, more convenient for pilots to solder. Come with a 25.5*25.5mm whoop mounting pattern, this board can be added to both the toothpick drone and the cinematic whoop quadcopter frame like Pavo25 and X-knight 35. Specification Flight Controller CPU: STM32F411CEU6 (100MHZ) Six-Axis: BMI270 (SPI connection) Mounting Size: 25.5*25.5mm (M2 Anti-vibration rubber damper available) FC Firmware: betaflight_4.3.x_BETAFPVF411 OSD: Built-in Betaflight OSD (OSD chip: AT7456E) Receiver: SBUS/CRSF/DSMX Receiver BEC: 5V 3A Built-in current sensor Weight: 8.15g ESC ESC Chip: SILABS EFM8BB21F16G-C Support D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM Input voltage: 2S-4S Lipo Continuous current: 20A Peak current: 25A Firmware: G_H_20_REV16_7.HEX (Default BLHeli_S), BLUEJAY (Optional) Note: F411 4S 20A FC V5 is available to flash both BLHeli_S and BLUEJAY ESC firmware and it comes with default BLHeliI_S firmware. The main difference is that the
