betafpvBetaFPV
F4 1S AIO Brushless Flight Controller
Réf. fabricant 00313785_4
39.99 $≈ 34.66 €
Le prix en résumé
Vendu par betafpv à 34.66 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 59.59 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
Disponibilité inconnue
Coût total livré estimé
| Article | 34.66 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 9.93 € |
| Total livré | 59.59 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 20 g |
Description
F4 1S AIO FC(SPI Rx) integrates 4 components as F411 FC, 5A ESC, 25mW VTX and SPI receiver. It is ultralight only 3.92g and still maintains an amazing performance capability, which makes it become your best choice to run with a 1S brushless quad! F4 1S AIO FC(No Rx) integrates 3 components as F411 FC, 5A ESC and 25mW VTX. It supports external receivers like TBS Crossfire, Frsky XM+, and Spectrum DSMX etc. Meanwhile, this version can handle the 2S power system. Bullet Point Integrated with a 25mW VTX, this AIO board(Frsky/Futaba Rx) is ultralight only 3.92g, which can extremely save the weight of building a drone, perfectly suitable for the 1S weight-sensitive drone such as Meteor65 HD and HX100 SE. F4 1S AIO FC(No Rx) not only integrates with the 25mW VTX but also supports a 1-2S power system, which is perfectly suitable for weight-sensitive drones such as Meteor75 and Beta85 Pro2. This AIO board also reserves a Plug & Play port for the C01 Camera, C01 Pro Camera, and BETAFPV Nano HD Camera, no soldering work needed, super convenient for installation. Specially added with 2 RGB LED indicators, this board brings the drone an incredible light effect while pilots flying on the night. This board can handle 5A continuous current(6A burst), supports the 1S lipo battery, brings the drone a stronger flight performance. Come with a BT2.0 connector, it solves the problem of voltage sag, the discharge can be more efficient, which brings this board a better performance on function for power and responsiveness. Specification of F4 1S AIO FC(SPI Rx) Item: F4 1S AIO FC(Frsky/Futaba Rx) Weight: 3.92g(without antenna and BT2.0 connector) VTX Power: 25mW CPU: STM32F411CEU6 (100MHZ ) Six-Axis: MPU6000 (SPI connection) Firmware version: betaflight_4.2.0_STM32F411 Receiver: Support Frsky Receiver/ Futaba Receiver Motor Pin Connecter: 1.25mm Header Pins Mounting hole size: 29mm x 29mm / suitable for almost all kinds of whoop frame Specification of ESC Built-in ESC with 5A continuous and
