
Réf. fabricant 11071+12044
Vendu par holybro à 67.58 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 99.10 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 67.58 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 16.52 € |
| Total livré | 99.10 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 100 g |
Overview The Holybro Kakute F405 Wing Mini is a compact flight controller designed for fixed-wing and small UAVs, featuring the STM32F405 processor and the low-noise ICM-42688-P IMU with independent LDO for enhanced stability. It includes two onboard BECs for regulated power, an integrated barometer, I2C support, and analog OSD. Tailored for small aircraft, this flight controller delivers powerful performance and precision in a compact form, making it ideal for space-constrained setups. Features STM32F405 MCU running at 168 MHz High-Precision / low-noise ICM-42688-P IMU 2 On-board BEC output 5V, 5V/7.2V On-board voltage & current sensor Integrated SPL06 barometer I2C port Support Small & low-profile design fits into compact frames Supports INAV (7.1.2 & later), Ardupilot (4.5.6 & later), Betaflight (4.5.2 & later) Specifications MCU: STM32F405RGT6, 168 MHz, 192KB RAM, 1MB Flash IMU: ICM-42688P (SPI1) Baro: SPL06 (I2C2) OSD: AT7456E (SPI2) Onboard Blackbox: 128Mbits (SPI3) 5x Uarts (1,2,3,5,6) and R3 is with built-in inversion 7x PWM output, PWM7 used for NeoPixel LED by default 2x ADC (Bat1/Curr1) 1x I2C (the I2C2 is for external devices, also for onboard sensors) 2x LEDs for FC STATUS (Blue) and 3.3V indicator (Green) USB/DFU Key Extender with USB Type-C High-precision Current Sense (110A continuous, 132A peak) Battery Voltage Sensor: 1K:10K (Scale 1100 in INAV, BATT_VOLT_MULT 11 in ArduPilot, Scale 110 in Betaflight) Static power 110mA @5V FC Firmware ArduPilot: Kakute F405-Wing (4.5.2 & later) INAV: Kakute F405 Wing Mini (7.1.2 & later) Betaflight: Kakute F405 Wing Mini (4.5.6 & later) Power Board Input voltage range: 7.4~ 36V (2~ 8S LiPo) 2x ESC power pads Current Sense: 110A continuous, 132A peak. (Scale 250 in INAV, 40 A/V in ArduPilot,Scale 250 in Betaflight) BEC 5V output Designed for FC, Receiver, OSD, Camera, 2812 LED Strip, GPS, Telemetry, etc. Output 5.3 +/- 0.1V DC Continuous current 3 Amps, 4.8A Peak BEC VS output Designed for Servos Voltage adjustable