Réf. fabricant 11091+31102
Vendu par holybro à 108.32 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 147.98 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 108.32 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 24.66 € |
| Total livré | 147.98 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 150 g |
The version that is being shipped at the moment is Kakute H7 V1.5. From V1.3, now has USB-C, 9V 3A BEC for VTX, and a JST-SH connector for VTX port. For details on the difference between versions, please see this chart. Due to the end of production of MPU6000 IMU, ICM-42688-P will be used for the new version of Kakute H7, which is supported by Betaflight version 4.5.2 and later. Description: The Holybro Kakute H7 v1 Flight Controller is full of features, including integrated Bluetooth, dual plug-and-play 4in1 ESC ports, digital VTX plug, barometer, OSD, 6x UARTs, full Blackbox MicroSD card slot, 5V and 9V BEC, easy soldering layout, and much more. The Kakute H7 builds upon the best features of its F7 predecessor and further improves on hardware components and layout. With the additional integrated Bluetooth chip onboard, you can perform Betaflight configuration and tuning wirelessly on your phone with the SpeedyBee Android & IOS App. The Kakute H7 is DJI HD ready. It has an easy plug-and-play port with an onboard 9V regulator designed to power your HD video transmitter like DJI/Caddx FPV Air Unit & Caddx Vista while supporting an analog system. It has 6x dedicated UART ports with built-in inversion for peripherals (UART2 is used for Bluetooth telemetry), along with a full MicroSD Card slot for virtually unlimited Blackbox data logging. Dual plug-and-play 4in1 ESC connectors allow easy plug-and-play support for x8 Octocopter configuration and keeping it simple and clean. The integrated BetaFlight OSD makes it easy to display important information on your FPV display, like battery voltage, flight time, warnings, RSSI, smart audio features, and more. It is also ready for autonomous flight with the onboard barometer. There are LED & buzzer pads, an I2C pad (SDA & SCL) for external GPS/Magnetometers. Kakute H7 V1.5 Specification : MCU - STM32H743 32-bit processor running at 480 MHz IMU - ICM-42688-P Barometer - SPA06 OSD - AT7456E Onboard Bluetooth chip - ESP32-C3 Speedy
