holybroHolybro· Robots & kits
X500 V2 Kits
Réf. fabricant 30125
329.00 $≈ 285.12 €
Le prix en résumé
Vendu par holybro à 285.12 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 360.14 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
En stock
Coût total livré estimé
| Article | 285.12 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 60.02 € |
| Total livré | 360.14 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Historique de prix
2 relevés de prix/stock depuis le 20/08/2026
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 1.5 kg |
Description
Almost Ready-to-Fly (ARF) Kit Feature: New design and minimal assembly time (~15 minutes) Carbon Fiber frame with fiber-reinforced nylon connectors providing easy & straightforward installation Pre-installed motors & ESCs with simple XT30 power plugs for PDB Power distribution board (PDB) with XT60 & XT30 plugs - no soldering needed Mount for companion computers such as Raspberry Pi & Nvidia Jetson Nano Optional depth camera mount for Intel RealSense & Structure Core Mounting holes ready for Pixhawk Jetson baseboard (require standoffs) Note: Full X500 v2 Development Kit with Flight Controller, GPS, Telemetry Radio can be purchase here. Product Description: The X500 V2 ARF (Almost Ready-to-Fly) Kit is an affordable, lightweight, and robust carbon fiber professional drone kit that is easy to assemble (less than 15 minutes). It comes with the X500 V2 Frame Kit and motors, ESCs, power distribution boards and propellers preinstalled. It is perfectly compatible with various flight controllers such as the Holybro Pixhawk series, Durandal, Pix32 V5, etc. There are numerous improvements compared the previous model. The X500 V2 Frame Kit is made with full carbon fiber twill, with carbon fiber tube arms supported by the newly designed fiber reinforced nylon connectors with convenient notches on both motor and body sides, providing a much easier & more straightforward installation. The landing gear consists of 16mm & 10mm diameter carbon fiber tubes with connectors that has been thickened and strengthened. The spacing between top and bottom carbon fiber plates has been increased to provide an easier access. The platform board now has mounting holes for GPS & popular companion computers such as the Raspberry Pi 4 & Jetson Nano. The adjustable battery mounting board has been enlarged to support bigger batteries for longer flight time. The rail mounting system is ready to take a whole host of camera mounts and gimbals for various applications. There is an optional mount for variou
