holybroHolybro· Robots & kits
PX4 Development Kit - X500 v2
Réf. fabricant 30188
579.00 $≈ 501.78 €
Le prix en résumé
Vendu par holybro à 501.78 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 620.14 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
En stock
Coût total livré estimé
| Article | 501.78 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 103.36 € |
| Total livré | 620.14 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Historique de prix
3 relevés de prix/stock depuis le 20/08/2026
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 1.7 kg |
Description
Need longer flight time and greater payload capacity? Step up to the X650 Development Kit — built with a larger frame, more powerful motors, foldable arms, carbon-fiber propellers, and extra room for sensors and companion computers. PX4 Development Kit - X500 v2 is an affordable, lightweight, and robust carbon fiber professional development drone kit with the latest Holybro Pixhawk 6C or Pixhawk 6X Flight Controller, M10 GPS, and plug & play SiK Telemetry Radio. It is quick and easy to assemble (~30 minutes) without the need for soldering, so you can spend more time flying and developing instead. It comes with the X500 V2 Frame Kit and motors, ESCs, power distribution boards, and extra propellers. The Drone Arms are pre-installed with Motors and ESCs so they can be plugged right into the power distribution board without the need for soldering. The Frame (X500 v2) is made with full carbon fiber twill, with carbon fiber tube arms supported by the newly designed fiber-reinforced nylon connectors with convenient notches on both motor and body sides, providing a much easier & more straightforward installation. The landing gear consists of 16 mm and 10 mm diameter carbon fiber tubes with connectors that have been thickened and strengthened. The platform board now has mounting holes for GPS & popular companion computers such as the Raspberry Pi 4 & Jetson Nano. There is an optional Depth Camera Mount (available separately) for various depth cameras such as the Intel RealSense series & Structure Core Depth Cameras. The spacing between the top and bottom carbon fiber plates has been increased to provide easier access. The adjustable battery mounting board has been enlarged to support bigger batteries for longer flight times. The rail mounting system is ready to take a whole host of camera mounts and gimbals for various applications. All tools for installation are provided in the package. Note: The Pixhawk 6C Flight controller is compatible with both PX4 & Ardupilot, but it i
