
Réf. fabricant G24079HR1Z
Vendu par racedayquads à 352.69 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 441.23 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 352.69 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 73.54 € |
| Total livré | 441.23 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 132 g |
The Orqa H7 WingCore is an NDAA-compliant flight controller designed specifically for fixed-wing drones, VTOL craft, and UAVs. It contains a powerful STM32H743 MCU, which runs any of the common flight controller firmware (iNav, ArduPilot, PX4). Equipped with enough servo outputs for even the most complex fixed-wing platforms, the H7 WingCore is equally capable in both defense and enterprise roles. Check out everything Orqa and our Fixed Wing collection! Features Custom NDAA-compliant OSD (Text + Graphics) On-board integrated buzzer Twin analog switchable camera inputs Direct solder-free connection to most peripherals Specifications MCU: STM32H743 IMU: Twin (orthogonal) ICM-42688 Barometer: DPS310 Power Supply: 11.1VDC - 44.4VDC (3 - 12s Li-ion) BEC: 5V/8A, 6/7.2V/10A Current Sensor: 160A On-Board FC Software: iNav, ArduPilot, PX4 Telemetry: SIK Radio Interfaces: 1x full UART, 3x UART, 3x GPIO, 3x ADC, 11x PWM, 2x I2C, CAN bus, Micro SD-Card, 4x Motor Outputs (Dshot/PWM) Mounting: 30.5 x 30.5 mm Dimensions: 54 x 39 x 17 mm Weight: 36.6 g Includes 1x Orqa H7 WingCore FC 1x Cable FC - Hybrid vTx/C2 Rx (GH 6 pin - GH 6 pin, 150 mm) 1x Cable FC - VTX (GH 7 pin - GH 7 pin, 150 mm) 1x Cable FC - Camera 1 / Camera 2 (GH 6 pin - 2x PicoBlade 3 pin, 200 mm) 1x Cable FC - GPS (GH 6pin - GH 6 pin, 150 mm) 1x Cable FC - ASPD (GH 4pin - GH 4 pin 200 mm) 1x Cable FC - SIK (GH 4 pin - GH 6 pin, 150 mm) 1x Cable FC - CAN (GH 4 pin - GH 4 pin, 150 mm) 1x Cable FC - USB PCB (GH 5 pin - SH 5 pin, 100 mm) 2x Cable FC - Mot (GH 3 pin - GH 3 pin, L=200 mm) 1x Cable FC - Mot3&4 (GH 6 pin - 2 x GH 3 pin, L=200 mm) 1x Cable FC - Battery XT60 (XT60 Male - Open terminal, 200 mm) 1x USB PCB



