racedayquadsHolybro· Commande de moteurs
Holybro Tekko32 F4 Metal 65A AM32 4-in-1 ESC
Réf. fabricant 23157
128.51 $≈ 111.37 €
Le prix en résumé
Vendu par racedayquads à 111.37 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 151.64 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
Disponibilité inconnue
Coût total livré estimé
| Article | 111.37 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 25.27 € |
| Total livré | 151.64 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Historique de prix
2 relevés de prix/stock depuis le 20/08/2026
Caractéristiques (extraites automatiquement)
Électrique
| Courant | 65 A |
Mécanique
| Poids | 27 g |
Description
The Holybro Tekko32 F4 Metal 65A AM32 is the first 4-in-1 ESC on the market to adapt the fast F4 MCU. Updated to run on open-source AM32 firmware, it offers enhanced control and quick response. Check out all our 30x30 ESCs and the rest of our HolyBro selection! Features New & faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz) PWM Frequency: 16k to 96k Metal-cased MOSFET for excellent heat dissipation Massive on-board capacitance for noise filtering at 2068uf 3 oz copper PCB design to allow bigger current and better heat dissipation Separate drive & control circuit broadens the current capability of the drive circuit while reducing electrical interference to the control circuit. Specifications Continuous Current: 65A x4 Burst Current: 75A x4 Supports 4-6S battery Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc. ESC telemetry supported Onboard analog current sensor No output BEC AM32 firmware (target: AM32_TEKKO32_4IN1_F421) 1000uf 35v capacitor included (highly recommended for 6s setup) Amperage meter scale ratio: 180 Dimensions: 43 x 44mm / Weight: 15.8g Mounting holes: M4 30.5x30.5mm (M3 grommets included) IMPORTANT NOTES Airflow for the ESC is very important if you want to run this 4in1 in a high current. The battery wire (from Lipo to 4in1 ESC) should be at least 12AWG and well soldered. Links Tekko32 F4 Metal 4in1 ESC(65A) SPEC ESC Current Sensor Scale AM32 ESC Firmware Overview Includes 1 x Tekko32 F4 Metal 4in1 65A ESC 4 x M3 Anti-Vibration Silicone Grommet Insert 1 x Electrolytic capacitor: 1000uF 35v 1 x 8-pin to 8-pin 1mm pitch 65mm cable 1 x 8-pin to 8-pin 1mm pitch 25mm cable
