Réf. fabricant G24067CN1Z
Vendu par racedayquads à 28.87 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 52.64 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 28.87 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 8.77 € |
| Total livré | 52.64 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 6 g |
The HDZero Camera Switcher 2 allows you to run two MIPI cameras on a single VTX and switch between them instantly in flight. No soldering is required in the default configuration. There are many powerful use cases, such as day vs night vision, forward vs downward views, rear-view cameras, or wide vs zoom lenses. For advanced builders, the board also supports VTX-only control, manual GPIO control, and daisy-chaining to run more than two cameras. Check out our HDZero selection. Features Instant switching between two HDZero cameras Plug-and-play: no soldering in Standard Mode Works with Betaflight, iNav, and ArduPilot via Camera Control 1 Powered directly from the VTX (no extra wiring) Independent camera settings when controlled through the FC Advanced jumper options for manual control and multi-board setups Lightweight 20×20 mm board that fits directly into your stack Specifications Dimensions: 26mm × 26mm × 2.6mm Mount Pattern: 20 × 20mm Weight: 2.7g Connectors: HDZero MIPI ports (Cam 1, Cam 2, VTX) Control Input: 0–3.3 V GPIO when in manual mode Includes 1x HDZero Camera Switcher 2
