racedayquadsHDZERO· Commande de moteurs
HDZero Halo Stack - H743 ELRS FC (ICM42688) + 70A BLHeli_32 ESC - 20x20
Réf. fabricant 23498
196.34 $≈ 170.15 €
Réf. fabricant 23498
Vendu par racedayquads à 170.15 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 222.18 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 170.15 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 37.03 € |
| Total livré | 222.18 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Courant | 70 A |
| Poids | 86 g |
The HDZero Halo Stack - H743 ELRS FC (ICM42688) + 70A BLHeli_32 ESC - 20x20 combines the Halo Flight Controller and Halo 4in1 70A ESC into a race-ready powertrain, engineered by HDZero—leaders in high-performance digital FPV systems. Designed for power, reliability, and ease of assembly, this stack is the ultimate solution for competitive racing and freestyle pilots. With its clean layout, minimal wiring, and integrated components, the HDZero Halo Stack is the easiest way to build a professional-grade racing drone—without sacrificing performance, reliability, or serviceability. Check out all our 20x20 FCs and our HDZero selection! Features Plug-and-play HDZero race build – no soldering required for RX, VTX, or ESC connections Integrated Gemini true diversity ELRS receiver for superior control link stability TXCO-enhanced ELRS performance in high-heat race environments H7 processor for fast, responsive control Optimized for low-profile stacking with HDZero VTX Split-board architecture with copper bus bar for optimized burst throttle response 8-layer PCB with 3oz copper per layer and 24 MOSFETs Exceptionally clean power delivery protects flight controller from voltage spikes Conformal coating for moisture, dust, and corrosion protection Dual-sided motor solder pads for flexible builds Specifications HALO FLIGHT CONTROLLER MCU: STM32H743 (480MHz) Gyro: ICM42688 BEC Output: DC 5V/4A DC 9V/3A DC 4.5V/0.5A Black Box: 16MB Flash memory 12C Pads: Yes UART Pads: TX2/RX2, TX7/RX7, TX8/RX8 ESC Telemetry: RX4 VTX MSP UART: TX5/RX5 DJI HDL: RX3 Buzzer Pads: Yes LED Strip: Parallel or Serial USB: Type-C Analog OSD: No FC Firmware: Betaflight: HDZERO_HALO HALO 4in1 70A ESC MCU: AT32F421 (120MHz) Firmware: BLHeli 32.10 Input Voltage: DC 9V – 40V (3S – 8S) Telemetry: Supported Input Signal: Dshot 150/300/600/1200/2400, MultiShot, OneShot Output Voltage: VBAT (to power the FC) Max Current: Over 70Ax4 (Continuous) / 100Ax4 (Burst) Current Sensor: Scale = 170, offset = 0 Dual-Sided Sol
