racedayquadsiFlight· Commande de moteurs
iFlight Borg 5S 60R Stack - F4 Flight Controller + 60A 3-8S BL32 4-in-1 ESC - 20x20
Réf. fabricant 23086
124.34 $≈ 107.76 €
Réf. fabricant 23086
Vendu par racedayquads à 107.76 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 147.31 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 107.76 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 24.55 € |
| Total livré | 147.31 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
2 relevés de prix/stock depuis le 20/08/2026
| Courant | 60 A |
| Poids | 36 g |
The iFlight Borg 5S 60R Stack is built for serious FPV racers! The high-performance Borg 5S RX F4 FC with the powerful Borg 60R 60A 4-in-1 ESC with a compact 20×20 mounting - perfect for modern 5" racing drones. The FC features a built-in ELRS 2.4GHz receiver with an integrated antenna for a clean setup. With 60A continuous output, BL32 firmware and anti-spark/TVS protection, the ESC delivers race-ready performance. Check out all our 20x20 stacks as well as our entire iFlight selection! Features TVS (Transient Voltage Suppressor) Protection Bidirectional DShot & Telemetry Support 60A Continuous / 65A Burst Current Compact 20×20 Mounting Pattern Built-In High Polymer Capacitors Built-In ELRS 2.4GHz Receiver Integrated Anti-Spark Circuit External Receiver Support BL32 Firmware Specifications FLIGHT CONTROLLER VTX Protocol: Supports DJI MSP, SmartAudio, IRC Tramp, and HDZero Firmware Target: IFLIGHT_BLITZ_ATF435 (Betaflight) Input Voltage: 4–8S; supports LiHV batteries BEC: 5V 2.5A, 12V 2A (12V with VTX switch) Mount Pattern: 20×20mm / Φ4mm Dimensions: 34×28.5mm ±1mm Flash: 16MB (Blackbox flash) I2C Serial: Not supported MCU: AT32F435RGT7 OSD Chip: AT7456E LED Controller: Yes Motor Outputs: 4 Weight: 6.8g ±1g Beeper Pad: Yes Gyro: ICM42688 Barometer: N/A UARTs: 4 ESC Protocol: Supports DShot150/300/600, MultiShot, OneShot, etc Input Voltage: 3–8S; supports LiHV batteries Firmware Target: IFLIGHT_BLITZ_G3 32.9 Mounting Holes: 20×20mm / Φ4mm Bidirectional DShot: Supported Dimensions: 45×52mm ±1mm Max Continuous Current: 60A Max Burst Current: 65A (10s) Firmware: BL32 (32-bit ESC) Telemetry: Supported MCU: STM32G071N Current Sensor: No Weight: 14.5g ±1g Driver: FD6288 BEC: No Includes 1x iFlight 60R 60A 3-8S BL32 4-in-1 ESC - 20x20 1x iFlight Borg 5S F4 Flight Controller - 20x20 1x Hardware Kit 1x Cable Set
