
Réf. fabricant 22726
Vendu par racedayquads à 92.81 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 129.37 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 92.81 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 21.56 € |
| Total livré | 129.37 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 41 g |
The Lumenier LUX F765 Flight Controller is your ultimate solution for high-performance multirotor builds, offering robust features and seamless compatibility with Betaflight, Ardupilot, and PX4. Its NDAA-compliant design is for professional and recreational builders and pilots seeking unmatched reliability and precision, this FC is designed to level up your drone! Make sure to check out our other Flight Controllers and our Lumenier product selection! Features Supported Firmware - Betaflight, Ardupilot, and PX4 Blackbox Storage - SD Card and Flash I2C Ports for External Sensors 10V Regulator for VTX Power 5V Regulator for Accessories Analog Current Sensor Input Analog Battery Sensor Input CANbus Support (PX4 only) Camera Control Output LED Strip Control NDAA compliant and designed in the USA USB Type-C (2.0) 8 UART Ports Specifications Processor: MCU STM32F765, 216MHz, 512KB RAM, 2MB Flash Sensors: Built-in Gyro, Accelerometer, and Barometer Power Supply: 3S to 8S Battery Voltage Weight: 9g LED Indicators: 2x LEDs for Status (3.3V Power and Firmware Indicator) Power Regulators: Analog Inputs: 2x ADC (VBAT and Current) Camera Support: 1x Camera Input +10V Regulator for VTX +5V Regulator Mounting: Holes: 30.5mm x 30.5mm Dimensions: 38x38x4mm Outputs: 12x Motor/Servo Outputs LED Strip Control Buzzer Output Storage: Flash Storage: 128Mb SD Card Slot Ports: 1x External I2C Port USB Type-C (2.0) 1x CANbus Port 8x UART Ports Important Notes When using Ardupilot or PX4 builds, an sdcard is required to boot after firmware install. Links MANUAL Lumenier LUX F765 FC Manual FIRMWARE PX4: 002_LUXNDAAF7_PX4_v1.15.4.px4 002_LUXNDAAF7_PX4_bl.hex (PX4 Bootloader) Betaflight: 001_Betaflight_4.5.1_STM32F745_LUXNDAAF7.hex Ardupilot: 001_LUXNDAAF7_arducopter_v4.5.7_with_bl.hex Includes 1x Lumenier LUX F765 Flight Controller - NDAA 1x 63mm 8 pin JST-SH Cable 1x 23mm 8 pin JST-SH Cable 1x 64mm 6 pin JST-SH Cable 1x 75mm 4 pin JST-SH Cable 4x M3 Rubber Grommets



