Réf. fabricant 22656
Vendu par racedayquads à 49.49 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 77.39 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 49.49 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 12.90 € |
| Total livré | 77.39 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 5 g |
The Matek AP_Periph DroneCAN Magnetometer RM3100, designated as CAN-L4-3100, is a high-grade magnetic sensor module for drones. Based on the precise RM3100 sensor and incorporating ArduPilot firmware, it offers high resolution and stable performance across a wide temperature range. With low power consumption and immunity to signal noise, are you ready to upgrade your drone's navigational capabilities? Check out all our GPS modules, and our full line of Matek products! Features Enhanced Navigational Capability High-Grade Magnetic Sensor High Resolution & Stability DroneCAN Compatibility Low Power Consumption Signal Noise Immunity ArduPilot Firmware Specifications Power Supply: Voltage for CAN-L4-3100 board: 4.5–5.5V @ 5V pad/pin CAN Node MCU: STM32L431xC, 256KB Flash PNI RM3100: GEOMAGNETIC SENSOR Operating Temperature: -40 to 85 °C Power Consumption: 22mA FIRMWARE ArduPilot AP_Periph: MatekL431-GPS or MatekL431-PeriphUpdate via DroneCAN GUI Tool or Mission Planner (AP_Periph.bin) Update via STLink (AP_Periph_with_bl.hex) PARAMETERS CAN_P1_DRIVER = 1 (if attached to CAN bus1 port) or CAN_P2_DRIVER = 1 (if attached to CAN bus2 port) COMPASS_AUTODEC = 1 INTERFACE UART2: MSP output (MatekL431-Periph firmware) UART3: For external GNSS module ST Debug: SWCLK & SWDIO CAN: DroneCAN Protocol PHYSICAL Board Size: 36mm x 25mm x 10mm, Weight: 6g LED INDICATORS Blue (Slow Blinking): Working Blue (Fast Blinking): Booting Red: 3.3V power indicator Includes 1x MATEKSYS AP_Periph CAN Magnetometer - RM3100 1x JST-GH-4P to JST-GH-4P 20cm Silicone Wire
