
Réf. fabricant 19724
Vendu par racedayquads à 144.88 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 191.86 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 144.88 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 31.98 € |
| Total livré | 191.86 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
2 relevés de prix/stock depuis le 20/08/2026
| Courant | 60 A |
| Poids | 73 g |
The SkyStars Fly Stack features an H743 Dual Gyro HD Flight Controller and a KM 60A BLHeli_32 4-in-1 ESC with a 30x30 mounting pattern. Check out our other 30x30 Stacks, and our SkystarsRC collection! SkyStars H743 HD Flight Controller Input Voltage: 3-6S LiPo MCU: STM32H743VIT6, 480MHz, 1MB RAM, 2MB Flash Gyro: BMI270 Dual Baro: BMP280 OSD: Betaflight OSD UARTs: 8 Sets 8x PWM outputs 1x I2C 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) USB Type-C(USB2.0) 2x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr) 1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V) Dual Camera Inputs switch VTX 10V/Vbat filtered power ON/OFF switch DJI FPV OSD is supported by any spare UART Vbat Input: 7~25V (2~6S LiPo) BEC: 5V 2A Continuous (Max 3A) LDO 3.3V: Max 250mA Firmware: Betaflight - SKYSTARSH7HD Ardupilot : SKYSTARSH7HD Mounting: 30.5 x 30.5mm Dimensions: 39.5 x 39.5 x 7.8 mm Weight: 10.1g SkyStars KM60 60A BLHeli_32 4-in-1 ESC - 30x30 Continuous Current: 60A x4 Burst Current: 80A x4 Supports 3-6S battery Supports Dshot1200, Dshot600, Dshot300, PWM control signal ESC telemetry Supported No output BEC BLHeli_32 firmware Dimensions: 41x46 Weight: 18g Mounting holes: 30.5x30.5 M3 Includes 1x SkyStarsRC 30x30 Fly Stack H7 Single Gyro FC / KM60 BLHeli-32 45A 3-6S



