racedayquadsTBS· Robots & kits
TBS Caipirinha 2 FPV Flying Wing Kit
Réf. fabricant 8032
244.53 $≈ 211.92 €
Le prix en résumé
Vendu par racedayquads à 211.92 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 272.30 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
Disponibilité inconnue
Coût total livré estimé
| Article | 211.92 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 45.38 € |
| Total livré | 272.30 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 1.76 kg |
Description
The Caipirinha II is based on the Wipeout by HappyFlyers from Switzerland! A polycarbonate battery bay, push-to-open equipment bays, a PDB with up to 3 battery inputs, wiring channels that stretch across the entire wing, a huge 6mm-plywood-lined center section are just some of the innovations that make this plane stand out from the rest. An ultra-sleek and aerodynamic finish ensure that no energy goes to waste, and a very good glide slope makes thermaling or long distance slopeing highly enjoyable. We can confidently say it's going to be the only long range cruiser you will ever need, and the only flying wing in its weight class with such a performance envelope. We also sell this wing without the FPV system, for line of sight flying, or adding your own custom FPV setup. Browse the rest of our Wing Gear as well as our TBS Products! Features Small, lightweight, fly anywhere design Ultimate in flight stability and endurance Virtually indestructible EPP/Plywood construction Pre-cut camera, servo, battery, R/C receiver and video transmitter slots 2x push-to-open equipment bays for R/C and FPV electronics Pre-cut, sanded and covered ultra-lightweight elevons & pushrods Specifications 36.5in / 93cm wingspan 50oz / 1400g AUW (including GoPro Session5 and battery) 90min flying time 45mi / 75km endurance Battery (4S): Capacity: 4500mAh 4S - 6600mAh 4S, 20C or more SUGGESTED Dimension: 48 x 36 x 150 mm, 525g MAX Dimension: 60 x 44 x 165 mm, 550g Recommended FPV and Radio Equipment FPV camera: TBS ZeroZero II or TBS69 Video transmission: 5.8GHz: TBS FPVision or TBS UNIFY PRO V3 with TBS CORE PRO 2.4GHz: TBS CORE PRO with Unify 500mW / 800mW VTx Crossfire Micro Rx or Diversity Rx Preliminary Manual (for experts only): Lay out electronics (dry-fit) Glue wing halves together Set up radio gear and electronics Set elevon travel +8mm, -6mm AIL EXPO 60%, ELE EXPO 50% Mount propeller Check CG (bump near 30.5mm cutouts) Fly, Crash, Repair, Repeat! Includes 1x TBS Caipirinha 2 FPV Flying
