racedayquadsiFlight· Commande de moteurs
iFlight BLITZ Mini F7 V1.2 2-6S 20x20 Stack/Combo (F7 FC/ 55A 32Bit 4in1 ESC)
Réf. fabricant BF15679
148.74 $≈ 128.90 €
Réf. fabricant BF15679
Vendu par racedayquads à 128.90 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 172.68 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 128.90 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 28.78 € |
| Total livré | 172.68 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Courant | 55 A |
| Poids | 82 g |
The V1.2 of the iFlight Blitz Mini F7 E55 2-6S 20x20 Stack/Combo has arrived, now in Mini version. These new flight controllers are equipped with a plug and play connectors making connecting your video transmitter, radio receiver, and other periphery sensors a breeze. Check out all our 20x20 stacks as well as our entire iFlight selection! Features Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC indicator LEDs for visual debugging Specifications -October 20, 2023: Flight control Blackbox flash capacity changed from 16MB to 8MB -April 6, 2024: The flight control is updated to version V1.2, and the gyroscope is changed from BMI270 to ICM42688. Flight Controller MCU: STM32 F722 Gyro: ICM42688 Barometer: DPS310 OSD Chip: AT7456 Flash: 8MB (Blackbox flash) UARTS: 6 Motor outputs: 4x (SH1.0 connector) I2C serial: SDA / SLA pads Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Yes Firmware target: IFRC-IFLIGHT_BLITZ_F722 Mount pattern: 20x20 mm / 4mm PCB hole diameter, silicon grommets for M3 screws Dimensions: 30.5x27 mm Weight: 5g Wiring Suggestion UART 1 for VTX HD / Analog UART 2 for a Receiver UART 3/4/5 for GPS or other sensors that require a serial port UART 6 for ESC Telemetry ESC Model: E55 V1.3 Mounting Holes: 20x20mm/Φ4mm Weight: 11.3g Supports 2-6S Lipo input MCU： G071 Constant: 55 Amps Burst: 65 Amps Current sensor: Yes BEC: No Current rate: 200 Supports: DShot DShot150/300/600/MultiShot/ OneShot etc. Firmware: BLHeli 32 Target: IFLIGHT_BLITZ_G071_01 32.9 Firmware: BLHeli 32 Includes 1x iFlight BLITZ Mini F7 V1.2 2-6S 20x20 Stack/Combo (F7 FC/ E55 V1.3 32Bit 55A 4in1 ESC) 1x Silicon grommets 1x Wire harness for F7 FC
